Our Laboratory
Alumni
김학개 (Hakgae Kim)
B.S. in Mechanical Engineering: Chung-Ang University
Master course: Chung-Ang University, Department of Intelligent Energy and Industry
Research field: Heat transfer simulation, Laser micromachining
Conference
-(Oral) Pool Boiling Performance on SiC Surfaces Processed by Laser
-(Poster) Thermal Diffusivity Measurement of Metal Microwires using Transient Electrothermal Technique
-(Poster) Laser-fabricated microchannel heat sinks on SiC for direct liquid cooling
-(Oral) Laser-fabricated heat sink on SiC for liquid cooling, KSME 2023, Incheon, South Korea, November 1st- November 3rd, 2023.
1st author- Applied Surface Science, 2024.
Coauthor - 5 건
Rizwan Khan(리즈완 칸)
Workplace : Research professor, Pusan University
B.S. in Chemistry: University of Malakand, Pakistan
M.Phil in Chemistry: University of Malakand, Pakistan
Ph.D in Applied Chemistry: Okayama University, Japan
Research field: Functionalization of 2D material for Energy Storage Application
Conference:
-(Poster) Preparation of nitrogen-doped laser-induced graphene for micro-supercapacitor applications
1st author - Fabrication of functional laser-induced graphene using gelatin-2,6-diaminoanthraquinone coating for high-performance micro-supercapacitor, Journal of Power
1st co-author- Fabrication of modified laser-induced graphene using activated carbon and polyamic acid coating for flexible and high-performance microsupercapacitors, Carbon, 230, 119646, 2024
Sources, 621, 235305, 2024
Coauthor-1건
Anh Phan Nguyen(안 판 응우옌)
B.E. in Physics, University of New Orleans (New Orleans, LA, USA)
M.E. in Intelligent Energy and Industry, Chung-Ang University (Seoul, Korea)
Research Field: Laser-induced graphene
Conference:
-(Poster) High-Performance Washable PM2.5 Filter Fabricated with Laser-Induced Graphene, KSME 2021 fall conference, Gwangju, South Korea, November 5, 2021
Journal paper:
1st author -High-Performance Washable PM2.5 Filter Fabricated with Laser-Induced Graphene, Materials, 14(19), 5551, 2021
1st author - Fabrication of Co- and P‑Doped Laser-Induced Graphene for Use in Water Splitting Applications, ACS Applied Energy Materials, 7, 9, 3750-3760, 2024
Co-author-4건
Tran Van Chau (짠 반 자우)
Workplace: Senior researcher at Advanced Technology Center, Le Quy Don Technical University, Vietnam.
B.E. in Mechanical Engineering, Hanoi University of Science and Technology (Hanoi, Vietnam)
M.E. in Mechanical Engineering, Hanoi University of Science and Technology (Hanoi, Vietnam)
Ph.D. in Mechanical Engineering, Chung-Ang University (Seoul, Korea)
Research Field: 3D printing
Conference:
-(Presentation) Self-Propagating Reduction of Graphene Oxide Film, KSME 2021 fall conference, Gwangju, South Korea, November 5, 2021
-(Poster) Self-Propagating Reduction of Graphene Oxide Film for Supercapacitor Applications, KSME TED 2022 spring conference, Gyeongju, South Korea, April 22, 2022
-(Presentation) Simultaneous self-propagating reduction and cobalt oxide incorporation of graphene oxide films for supercapacitor applications, MMMS 2022, Can Tho, Vietnam, November 11, 2022
Journal paper:
1st author - Controllable self-propagating reduction of graphene oxide films for energy-efficient fabrication
1st co-author- Laser-directed energy deposition to achieve high-aspect-ratio micropillar arrays for 3D interdigitated microsupercapacitors
1st author (conference paper) - Simultaneous Self-propagating Reduction and Cobalt Oxide Incorporation in Graphene Oxide Films for Supercapacitor Applications
Co-author: 10건
S.S Mani Prabu (마니 프라부)
Workplace: Assistant professor, SSN college of engineering, Shiv Nadar University group, Chennai, Tamilnadu.
B.E. in Mechanical Engineering, Anna University, Tamilnadu, India
M.E. in Manufacturing Engineering, Anna University, Tamilnadu, India
Ph.D. in Metallurgy Engineering and Materials Science, IIT Indore, Madhya Pradesh, India
Research Field: Manufacturing and metallurgy of nitinol shape memory alloys- Additive manufacturing, Welding, thin-film deposition.
Journal paper:
1st co-author- Improving the actuation behavior of nitinol shape memory alloys by nanosecond laser surface texturing
Ravindra Nathuji Bulakhe(라빈드라 나투지 블라케)
Workplace: Research professor, 성균관대학교
B.S. in Physics: Department of Physics, Savitribai Phule Pune University, Pune, India
M.S. in Physics: Department of Physics, Savitribai Phule Pune University, Pune, India
PhD in Physics: Department of Physics, Shivaji University, Kolhapur, India
Research Field: Development of Nanomaterials of Metal oxides, Metal sulfides and carbon materials, its composites for energy storage devices (supercapacitors, and Li-ion Battery)
Conference: (Presentation) Chemically Synthesized Nano-hybrid Materials for High-Performance Hybrid Supercapacitor Applications, AMSCA MAVERICK 2022, SPPU Pune, India, November 18-20, 2022.
Journal paper: 1st author - Mesoporous nanohybrids of 2D layered Cu–Cr phosphate and rGO for high-performance asymmetric hybrid supercapacitors
1st author - Chemically synthesized mesoporous nickel cobaltite electrodes of different morphologies for high-performance asymmetric supercapacitors
1st author - Chemical route to the synthesis of novel ternary CuCr2S4 cathodes for asymmetric supercapacitors
이정배(Lee Jungbae)
Workplace : 삼성전자 DS 반도체연구소
B.S. in Mechanical Engineering: Chung-Ang University
Master course: Chung-Ang University, Mechanical Engineering
Research field: Laser-induced graphene, Diamond CVD
Conference:
(Poster) Fabrication of Densified Laser-Induced Graphene Microsupercapacitors, KSMTE 2020 fall conference, Jeju, South Korea, December 4, 2020
(Presentation) 올-레이저 (All-laser) 공정을 이용한 빠르고 간단한 마이크로 히트싱크 제작, KSME TED 2022 spring conference, Gyeongju, South Korea, April 21, 2022
(Presentation) 반도체 히트싱크 디바이스 제작을 위한 레이저 가공, KSMTE 2022, Gangneung, South Korea, July 15, 2022.
Journal paper: 1st author -Densified Laser-Induced Graphene for Flexible Microsupercapacitors, Energies, 13 (24), 6567, 2020
Coauthor - 7건
Patent: 출원 - 1건
Hao Yu Zhou (주호유)
Workplace : Intel Semiconductor Storage Technology (Dalian) Ltd.
Bachelor of Mechanical Engineering: 2015-2017 LUDONG University (China), 2018-2019 University of ULSAN (Korea).
Master course: Chung-Ang University, Department of Intelligent Energy and Industry(CAYSS scholarship, full-tuition waiver)
Research field: laser cutting and drilling
Conference:
(Poster)Heat Scanning for the Fabrication of Conductive Fibers, KSME 2021 spring conference, Jeju, South Korea, May 28, 2021
(Poster)Laser-assisted fabrication of microchannels for the application in boiling heat transfer, KSME 2021 fall conference, Gwangju, South Korea, November 3, 2021
Journal paper: 1st author - All laser-based fabrication of microchannel heat sink, Materials and Design, 211, 110968, 2022
Coauthor - 2건
Mahima Khandelwal (마히마 칸델왈)
Workplace: Research Professor, Korea University
B.S. in Chemistry, University of Delhi, India (2005-2008)
M.S. in Chemistry, Department of Chemistry, University of Delhi, India (2008-2010)
PhD in Chemistry, Department of Chemistry, Indian Institute of Technology Roorkee (IITR), Roorkee (2010-2016)
Research Field: Carbon-based materials and their functionalization for energy storage and conversion applications
Journal paper:1st author-Simple fabrication of Co3O4 nanoparticles on N-doped laser-induced graphene for high-performance supercapacitors, RSC Advances, 61, 38547-38554, 2021
1st author -Nitrogen and Boron Co-doped Densified Laser-induced Graphene for Supercapacitor Applications, Chemical Engineering Journal, 428, 131119, 2022
1st author-Nitrogen and phosphorous Co-Doped Laser-Induced Graphene: A High-Performance electrode material for supercapacitor applications, Applied Surface Science, 576, 151714, 2022
Coathor - 1건
장진아 (Jina Jang)
Workplace: SK이노베이션 기술혁신연구원
Bachelor of Mechanical Engineering: Chung-Ang University
Master course: Chung-Ang University, Mechanical Engineering
Journal paper: 1st author -Laser Pyrolysis of Imprinted Furan Pattern for the Precise Fabrication of Microsupercapacitor Electrodes, Micromachines 2020,11,746
1st author - Heat Scanning for the Fabrication of Conductive Fibers, Polymers, 1405, 13 (9), 2021
Coauthor - 3건
Patent: 등록 - 2 건 (히터 열공정을 이용한 웨어러블 디바이스용 도전사 제조, 유연성과 높은 축전용량을 갖는 고종횡비 슈퍼커패시터 전극 및 그 제조방법)
Phuong Thi Nguyen (웽 티 프엉)
Workplace: Battery Researcher, Viettel Corperation(Hanoi, Vietnam)
Bachelor of Science - Physics and Education: Hanoi National University of Education (Hanoi, Vietnam)
Master course: Chung-Ang University, Mechanical Engineering (CAYSS scholarship, full-tuition waiver)
Research field: Fiber-type supercapacitors
Conference:
(Poster) Pulsed Laser Thermal Growth of Periodic Silicon Nanowire Arrays, KSME 2019 fall conference, Jeju, South Korea, November 13, 2019
Journal paper: 1st author - Nanosecond laser-induced reshaping of periodic silicon nanostructures, Current Applied Physics, 22, 43-49, 2021
1st author - Laser-Assisted Fabrication of Flexible Monofilament Fiber Supercapacitor, Journal of Materials Chemistry A, 2021
Coauthor - 2 건
Patent: 등록 - 1건 (섬유형 슈퍼커패시터 및 그 제조 방법)
김경연 (Kim Kyung Yeun)
Workplace: Seoul National University, Mechanical Engineering, MS & Ph.D combined candidate
Bachelor in mechanical engineering: Chung-Ang University (Seoul, South Korea)
Research field: Electrochemical capacitors, Carbon nanomaterials
Conference:
(구두발표) (1)
연구분야: 탄화된 폴리이미드 전극 제조
Journal paper: 1st author - Simultaneous densification and nitrogen doping of laser-induced graphene by duplicated pyrolysis for supercapacitor applications, Journal of Power Sources, 441, 227199, 2019
Coauthor - 2 건
Patent: 등록 - 2 건(치밀화된 레이저 유도 그래핀의 제조방법, 레이저 유도 그래핀 타입 에어 필터 및 이의 제조방법)
최 하예린 (Choi Ha Ye Lin)
Workplace: LG화학 기술연구원
Master in mechanical engineering: Chung-Ang University, Mechanical Engineering (GRS scholarship, full-tuition waiver)
Bachelor in mechanical engineering: Chung-Ang University (Seoul, South Korea)
Research field: Electrochemical capacitors, Carbon nanomaterials
Conference:
(구두발표) (1) Fabrication of flexible graphene electrodes using laser photothermal processing, KSMTE 2018 fall conference, Seoul, South Korea, October 5, 2018 (2) 레이저 열공정을 통한 슈퍼커패시터용 그래핀 전극 용접 및 활성화, KSME 2019 Spring Conference of Thermal Engineering, Busan, South Korea, May 24, 2019. (3) Application of Flexible Metal Microgrid for Graphene Supercapacitor, KSME 2019 fall conference, Jeju, South Korea, November 15, 2019
(포스터발표) Fabrication of Flexible Graphene Electrode via Laser Welding, KSPE 2018 Fall conference, Gunsan, South Korea, Oct 26, 2018
Journal paper: 1st author - Laser transmission welding and surface modification of graphene film for flexible supercapacitor applications, Applied Surface Science, Volume 483, 31 July 2019,
Coauthor - 2건
Patent: 등록 - 4건(치밀화된 레이저 유도 그래핀의 제조방법, 섬유형 슈퍼커패시터 및 그 제조 방법, 레이저를 이용한 3차원 금속 프린팅 장치 및 방법, 히터 열공정을 이용한 웨어러블 디바이스용 도전사 제조)
Che Huu Cuong (체 휴 끄엉)
Bachelor of mechanical engineering: Bach Khoa University (Ho Chi Minh University of Technology, Vietnam)
Master course:Chung-Ang University, Mechanical Engineering (CAYSS scholarship, full-tuition waiver)
Research field: Twisted string actuation
Journal paper: Coauthor - Highly Durable Bidirectional Joint with Twisted String Actuators and Variable Radius Pulley, IEEE/ASME Transactions on Mechatronics, 1083-4435 (c), 2019
Patent: 등록 - 1건(스트링 꼬임 유닛 및 이를 포함하는 스트링 꼬임 구동기)
Tran Xuan Tung (슈안쩡 짠)
2018.08 Master in Mechanical Engineering, Chung-Ang University
Thesis title: Laser Thermal Reduction of Graphene Oxide Paper for the Fabrication of Supercapacitors
Journal paper: Laser-Induced Reduction of Graphene Oxide by Intensity-Modulated Line Beam for Supercapacitor Applications, ACS Applied Materials & Interfaces, 10 (46), 39777-39784, 2018.
Effect of Enhanced Thermal Stability of Alumina Support Layer on Growth of Vertically Aligned Single-Walled Carbon Nanotubes and their Application in Nanofiltration Membranes, Nanoscale Research Letters, 13 (1), 173, 2018.
Conference presentation: Laser Thermal Reduction of Graphene Oxide Paper for the Fabrication of Supercapacitors, KSME 2018 Spring Conference of Thermal Engineering, Jeju, South Korea, April 26, 2018.